Corvette Image Body Panels - NCRS Discussion Boards

Corvette Image Body Panels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe C.
    Expired
    • August 31, 1999
    • 4598

    Corvette Image Body Panels

    If anyone here has personal experience with Corvette Image panels, as they were made about 2 years ago, non gelcoated, please let me know. Exactly how did you prep them for paint, and how have they held up so far.
    Thanks in advance.

    Joe
  • Bill B.
    Expired
    • September 30, 2002
    • 351

    #2
    Re: Corvette Image Body Panels

    Joe, cannot answer the questions you asked but (to the best of my recollection about two years ago) I remember seeing a 59 one-piece complete nose section installed on a car. It looked great but the eyebrow/bumper areas were not consistent on both sides--they were a little off from each other if you looked closely.

    Comment

    • Kent

      #3
      Re: Corvette Image Body Panels

      I have a lower front valance from Corvette Image on my Mossport '66 that I painted in '97 and the paint has no problems at all on that part.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"