C1 T-10 case tag. - NCRS Discussion Boards

C1 T-10 case tag.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Norbert R.
    Expired
    • March 1, 2002
    • 38
    #1

    C1 T-10 case tag.

    I was checking my trans. numbers and found a small tag that looked like the numbers 11-1B or possibly 11-16 on it? Could anyone help explain this tag? The tag has small rivets on both ends and attached to the rt. side of the casing.
    thanks
    Tags: None
      • Top
    • Mike M.
      NCRS Past President
      • May 31, 1974
      • 8365
      #2
      Re: C1 T-10 case tag.

      Do you mean the tag is riveted to the main case? if so , i've not seen such a tag. Might possibly be a tag a tranny rebuild shop attached?mike
        • Top

        Comment

        • Loren L.
          Extremely Frequent Poster
          • April 30, 1976
          • 4104
          #3
          Assuming that this is a cast iron main case,

          the numbers are 11 16 and represent the month and date of the casting.
            • Top

            Comment

            • Norbert R.
              Expired
              • March 1, 2002
              • 38
              #4
              Re: C1 T-10 case tag.

              Yep, a small tag about 1 1/2" long x 1/2" wide. looks orig. located under the cast T10-1B on the case. Thought it may be a Nov.# Id. My car is a early Nov. car!
                • Top

                Comment

                • Norbert R.
                  Expired
                  • March 1, 2002
                  • 38
                  #5
                  Re: Assuming that this is a cast iron main case,

                  Yes, you are correct. It is cast iron. Thats what i thought it could be. I have another T10-1B, with a T10-7D tail as a spare that didn't have the tag?
                  I just wanted to understand who, what, where, when.
                  By the way, did you notice that your answer came back at 11:16 !!!!
                  thats wild.
                  Thanks
                    • Top

                    Comment

                    • Joe L.
                      Beyond Control Poster
                      • February 1, 1988
                      • 43193
                      #6
                      Re: C1 T-10 case tag.

                      Norbert------

                      I think that if you look closer you'll find that it's not an actual tag rivetted to the main case. Although it may appear like such a tag, I think you'll find that it's actually part of the casting with a raised surface that appears like a seperate tag and the impression of rivets on the ends (actually, these are the vestige of the screw heads which held the plate in the mold).

                      I've never seen any such tag rivetted to a T-10 main case and, even if such a seperate tag had been used, I don't think that rivets would ever have been used as an attachment methodology.
                      In Appreciation of John Hinckley
                        • Top

                        Comment

                        • Tom D.
                          Extremely Frequent Poster
                          • September 30, 1981
                          • 2126
                          #7
                          Time Zones?

                          Could be the system is taking the time off each computer?
                          https://MichiganNCRS.org
                          Michigan Chapter
                          Tom Dingman
                            • Top

                            Comment

                            • Craig S.
                              Extremely Frequent Poster
                              • June 30, 1997
                              • 2471
                              #8
                              Re: Time Zones?

                              No mystery guys, Loren was responding to Norbert's original 10:21am post, not his later 11:18am post. You can tell by the indentation alignment of the post, it is off the original thread....Craig
                                • Top

                                Comment

                                Previous template Next
                                Working...

                                Debug Information

                                Searching...Please wait.
                                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                Please push the back button and reload the previous window.'
                                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                Please push the back button and reload the previous window.'
                                An internal error has occurred and the module cannot be displayed.
                                There are no results that meet this criteria.
                                Search Result for "|||"