C3 -distributor band NEW Vs original - NCRS Discussion Boards

C3 -distributor band NEW Vs original

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dale P.
    Expired
    • September 30, 1995
    • 248

    C3 -distributor band NEW Vs original

    Is there any good way to deteremine if a distributor has the "orginal" band Vs one that has just been produced? Can you check the band "date" Vs some other part of the distrib. that also has a date code?
  • Wayne M.
    Expired
    • March 1, 1980
    • 6414

    #2
    Re: C3 -distributor band NEW Vs original

    Don't know about the repop's, but "New-Over the-Counter" C2 distrib 1111069, ordered from the dealer in 1980, has a tag (0 D 23 -- could be April '70) that is appreciably THINNER than the originals I have from the 1968-74 era. It's still colored the "pinkish-red" on one of the surfaces.

    I wouldn think a reproduction seller would at least get the thickness correct.

    Comment

    • Mark #28455

      #3
      Re: C3 -distributor band NEW Vs original

      the original 1960's style distributors did not have a hole drilled into the back side of the housing where the tach drive gear goes. There are date codes on every casting but are not visible when installed on the car.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"