C2 Wiring Question? - NCRS Discussion Boards

C2 Wiring Question?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ralph E.
    Expired
    • February 1, 2002
    • 905

    C2 Wiring Question?

    At the proportioning valve on a 67 Corvette their is a wire for Low fluid warning. How does can the wire connector be removed so that the routing could be changed. Don't want to break anything an it seem a bit fragile. Bubba has it hanging under the clutch push rod.

    Ralph #37280
  • Ralph E.
    Expired
    • February 1, 2002
    • 905

    #2
    Re: C2 Brake System Warning Light Switch

    Correction. The wire is connected to the "Brake System Warning Light" switch under the master cylinder. How is the wire connector removed?

    Comment

    • Wayne W.
      Extremely Frequent Poster
      • April 30, 1982
      • 3605

      #3
      Re: C2 Brake System Warning Light Switch

      Just a simple plug in with a boot. Pull on it.

      Comment

      • Ralph E.
        Expired
        • February 1, 2002
        • 905

        #4
        Re: C2 Brake System Warning Light Switch

        Wayne, you were right on. I pulled real hard and off she came. Thanks.

        Ralph #37280

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"