Rally wheels - NCRS Discussion Boards

Rally wheels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Terry Leeker

    Rally wheels

    My '58 came with tires mounted on Rally Wheels. I see in various post, that there are letters or part numbers identifing the wheel to a particular year and make vehicle. I can't seem to find them. Are they under the tires?
  • Ronald D, Rains

    #2
    Re: Rally wheels

    test

    Comment

    • Chuck R.
      Expired
      • April 30, 1999
      • 1434

      #3
      Re: Rally wheels

      Look close to the valve stem. If theres alot of paint on the rims, they might be hard to see.

      Chuck

      Comment

      • Peter L.
        Extremely Frequent Poster
        • May 31, 1983
        • 1930

        #4
        Re: Rally wheels

        Terry - Chuck has most likely hit on the answer, as one would generally expect to see the wheel code ( a one ot two letter designation) stamped by the valve stem hole on original '67 and '68 (I'm not sure if it was all the '68 production year) production year rallye wheels and later rallye wheels had the wheel code plus manufacturing location and date information in the same general area. BTW, I have at least one '67 rallye wheel without a wheel code stamp. Also look on the outside face on the webs by the lug bolt holes and you should find a GM stamped on one of the webs and K-H stamped on another. '67 ralleys had the GM and K-H stamping and I think later ralleys did also, so you should be able to tell if it's a Kelsey Hayes wheel made for GM . If I'm wrong someone will send a correction. If the wheels are '67s or '68s, the date of manufacture and wheel size information will be stamped inside the wheel "under the tire." Pete

        Comment

        • Mike Baker

          #5
          For once I can contribute something

          The date stamps began calendar year '68. Wheels made prior to 1/1/68 did not have the date stamped at the valve stem.

          Comment

          • Peter L.
            Extremely Frequent Poster
            • May 31, 1983
            • 1930

            #6
            Re: For once I can contribute something

            Mike - Thanks for the confirmation on the '68 wheel external date stamped info. Pete

            Comment

            Working...

            Debug Information

            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"