'57 Seat Adjustment Slide Assembly - NCRS Discussion Boards

'57 Seat Adjustment Slide Assembly

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bob A.
    Very Frequent User
    • April 1, 2003
    • 172

    '57 Seat Adjustment Slide Assembly

    I would like to know how to take the Adjustment Slide Assembly apart. One of the clips that holds two ball bearings and a roller wheel dropped out, I can't get the rest of it apart. Your help will be greatly appreciated!

    Regards,

    Bob
  • John M.
    Expired
    • January 1, 1999
    • 1553

    #2
    Re: '57 Seat Adjustment Slide Assembly

    Bob,
    You will have to bend the tab on the bottom of the slide so that it will allow the slide come apart. Then just take a deadblow hammer or mallet and drive the slides apart. The rollers will drop out the bottom through a square hole in the slide as you get to that location.

    Regards, John McGraw

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"