Holley Install Advice - NCRS Discussion Boards

Holley Install Advice

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rob M.
    Very Frequent User
    • April 30, 2003
    • 657

    Holley Install Advice

    I am going to install my new Holley 3367 this weekend on my 66 327/300. Any words of wisdom for a novice (beyond what's in the service manual)?

    Thanks in advance.
    Rob

    '66 327/300 Regional Top Flt
    '08 6 speed coupe
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: Holley Install Advice

    Yup - see my post and photo down below under the "'69 Fuel Return Hose" thread about plugging the "hot-slot" holes in the intake before you install your nice new carb

    Comment

    • Rob M.
      Very Frequent User
      • April 30, 2003
      • 657

      #3
      Thanks John! *NM*

      Rob

      '66 327/300 Regional Top Flt
      '08 6 speed coupe

      Comment

      • Wayne K.
        Expired
        • December 1, 1999
        • 1030

        #4
        Will the 3367 listed as a replacement.....

        for the 66 also be jetted and power valve correct for a 67 L-79? Will all the connections be the same ( choke, etc.) as a 3810 so that no mods are required ?

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"