C2 Rear Sway Bar - NCRS Discussion Boards

C2 Rear Sway Bar

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • David Maxwell

    C2 Rear Sway Bar

    I am confused, Is the original rear sway bar supposed to be straight across or have small bends in it. I have saw both on ebay. They 1 that is straight says it is the real original and not the 68 and up reproduction. The other one has to small bends in it and that guy also says it is original. Paragon seems to agree with the straight one. Does anyone here know?
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: C2 Rear Sway Bar

    assembly manuals, back in the big block rpo section illustrate the c-2 rear sway bars common to the mark 4 equippped c-2's. mike

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193

      #3
      Re: C2 Rear Sway Bar

      David------

      The original 65-67 rear bar was "straight". I'm not sure about the configuration of the 68-only bar. The 69-74 rear bar had "offsets" in the cross-car section. The 69-74 bar became the SERVICE bar for 65-68 models when the original pieces were discontinued from SERVICE by GM.
      In Appreciation of John Hinckley

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"