Tweet
Does the '60 rear window channel (attaches to rear of door with two phillips screws) have anything in it? I have the felt / fuzz kit for the front and top opening but nothing for the rear. Mine was just painted black and very greasy. Thanks for any help, Don H.
-
-
Re: '60 window channel
Don...
Yes, a black fuzz type material goes in the rear run. I used strips from a black sweat-shirt that makes the window easier to roll up & down.
Rear window run liners from supply houses make this task a real grind. -
Re: '60 window channel
The liners supplied by the usual vendors is almost universally reported to be too thick. I use material from an old convertible top with the vinyl side glued to the channel and the fabric side to the window. I use a square handled punch that is just the same width as the window to smooth out the fabric. You must have a smooth job with no wrinkles.Comment
-
Re: '60 window channel
Don, please check you e-mail, I need your help on a 1960 fastener question.Comment
Comment