C2-Need a picture - NCRS Discussion Boards

C2-Need a picture

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mac peppers

    C2-Need a picture

    If anyone has the carpet out of the rear of a C2 Coupe, I need a picture if you have time to mess with it. i need a shot of the area under the side of the back glass above the wheel well, looking up as much as possiable. I'm trying to see how the inside window reinforcing bonds to the body. mine is a 63, but i think the side is probably the same on all of them. mine has been altered and i'm repairing it and can't find one in my area to look at. my email is britstar@hopper.net
    thanks,
    mac
  • Paul L.
    Expired
    • November 1, 2002
    • 1414

    #2
    Re: C2-Need a picture

    This is the best I can do. It is not my car so I can't give more details.

    Comment

    • mac peppers

      #3
      Re: C2-Need a picture

      thanks paul,
      that's the right area but i can't see behind the reinforcing lip. mine looks somewhat like this but the window reinforcing is away from the body toward the rear of the window and it looks like it should be bonded to the body. there is a gap there. i know a narrow piece of vinyl goes on the bottom of the window reinforcing, do you know what type of finish is on the underside of the body above the wheel well behind this reinforcing?
      thanks,
      mac

      Comment

      • Paul L.
        Expired
        • November 1, 2002
        • 1414

        #4
        Re: C2-Need a picture

        Mac,
        I am working with pics that someone sent me for my shoulder belt project. This is not quite what you want I guess. I can remove the interior trim on my 1967 coupe later today but I am not exactly sure what area to take a pic of. Can you be more specific?

        Comment

        • mac peppers

          #5
          Re: C2-Need a picture

          hey paul, thanks, but please don't take anything apart. from your first picture, shoulder4.jpg, i think mine is correct as it is. now i don't know what interior material goes in the area above the wheel well. it's the horizontal area above the wheel well. i've marked up your picture but i'll have to figure out how to show it to you, the forum email will not let me attach. a previous owner of my car put in a custom interior and i'm trying to get it back to original and i don't have a go-by around.
          mac

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"