62 Motor mount - NCRS Discussion Boards

62 Motor mount

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Terry D.
    Extremely Frequent Poster
    • May 31, 1987
    • 2690

    62 Motor mount

    Thought I would try something new, at least for me, and mount the engine frame mounts to the engine instead of leaving them on the frame. After snugging down the bolts the frame mounts are loose between the rubbers, is this right? It's as though the spacer is too long. Didn't notice this when I took it apart. I have the correct rubber pieces but not sure about the bolts or spacers.
    Terry
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: 62 Motor mount

    Sounds like the sleeves(spacer) is the problem. don't think manner of frame mount to frame would make any difference. there should be no slop between motor mount/rubber cushions/frame mount. Mr Gravity disallows such. good luck, mike

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"