1963 Seat Track Assembly

[Rick A.]

Folks,

Anyone have any clue as to who I can contact about a paasenger side seat track assembly? Have a "rock" in the original one and it was one of my FAILURES at the PV when at Wildwood.

[Harry Sadlock]

Re: 1963 Seat Track Assembly

Rick, Sounds like the PV went well in all other areas, great news. Both seats on a 63 are the same. I had the same problem with my 63. The fix for mine was to remove the seat, ensure all the bolts were tight (bottom and back). I also used a level and a tape measure to ensure the height adjustment feet were at the same distance and that they sat flat on the floor.

Harry

38513

[Joe R.]

Re: 1963 Seat Track Assembly

Rick,

A common problem with all mid years as the years and the weight have caused the rails in the tubes to become loose. Paragon has a service to refurbish the seat tracks however you may be able to tighten them enough to get thru PV with no problem. When you turn them over you will see a tube in a tube and the outer tube has expanded. Reducing the size back to original with a clamp or bench vise may help your problem. Don't overtighten as the seat won't slide and that would be another problem.

Go carefully and the results will be amazing.

Regards,

JR

[Rick A.]

Re: 1963 Seat Track Assembly - Harry/JR - THNX! *NM*