1966 chassis body shims - NCRS Discussion Boards

1966 chassis body shims

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dennis Corrigan

    1966 chassis body shims

    Looking for the chassis reference dimensions to the body mounts to determine correct shimming for a restored 1966 frame. Have seen them for some other years but not 1966. Any sources would be appreciated.
  • Michael H.
    Expired
    • January 29, 2008
    • 7477

    #2
    Re: 1966 chassis frame shims

    Dennis,

    I have the prints and frame mount pad dinension sheet for 66. I can scan and send if necessary. Are the original frame shims missing?

    Michael

    Comment

    • Wayne W.
      Extremely Frequent Poster
      • April 30, 1982
      • 3605

      #3
      Re: 1966 chassis frame shims

      The square formed by the center box of the frame is all on the same level. The rear mounts are 7 inches higher and the front at the radiator is 7/8 inch lower.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"