63 body work - NCRS Discussion Boards

63 body work

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rainer S.
    Very Frequent User
    • May 31, 2003
    • 468

    63 body work

    I have stripped the body completely down to the fiber glass. What, if anything, should I put on the panel joints, along the fenders ? Most of the joints are very even, in various spots, the joints need to be filled. The previous owner had put fiberglass filler with short strands on the joints, which I have now sanded off again, for the most part. I have 3M filler with short strands, but also another 3M filler, w/o the strands, in addition to glazing compuond. All three products use a hardener. Which is better to use ?

    Rainer
  • Michael H.
    Very Frequent User
    • July 31, 1998
    • 180

    #2
    Re: 63 body work

    Hey Rainer -

    Pick up a set of fiberglass repair/painting videotapes from Eckler's. The investment will pay for itself many times over.

    Comment

    • Michael H.
      Very Frequent User
      • July 31, 1998
      • 180

      #3
      Re: 63 body work

      Hey Rainer -

      Pick up a set of fiberglass repair/painting videotapes from Eckler's. The investment will pay for itself many times over.

      Comment

      • Rainer S.
        Very Frequent User
        • May 31, 2003
        • 468

        #4
        Re: 63 body work

        Mike, I thought about it before, to buy the video, but the apearance of the video jacket made me think, that it was produced a long time ago, and therefor may be out of date. But I will order a copy tomorrow.
        Thanks for your advise...

        Rainer

        Comment

        • Rainer S.
          Very Frequent User
          • May 31, 2003
          • 468

          #5
          Re: 63 body work

          Mike, I thought about it before, to buy the video, but the apearance of the video jacket made me think, that it was produced a long time ago, and therefor may be out of date. But I will order a copy tomorrow.
          Thanks for your advise...

          Rainer

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"