C2 Fuel Pump to Carb Line

[Justin N.]

Dear Members,

I have a 67 327/300hp motor with the aluminum 350hp intake. Do I need to run the 350hp line from the pump also? I see that the part #'s in the Paragon catalog are different between 300hp-350hp. Thank you Much!

Justin #41362

[Joe L.]

Re: C2 Fuel Pump to Carb Line

Justin-----

If you want it to fit correctly, then you will need to use the L-79 pump-to-carb fuel line. The configuration of the 2 lines is slightly different to accomodate the increased height of the L-79 manifold. So, if you're using that manifold on a 300 hp, you need to use the L-79 fuel line, too.

[Joe L.]

Re: C2 Fuel Pump to Carb Line

Justin-----

If you want it to fit correctly, then you will need to use the L-79 pump-to-carb fuel line. The configuration of the 2 lines is slightly different to accomodate the increased height of the L-79 manifold. So, if you're using that manifold on a 300 hp, you need to use the L-79 fuel line, too.