C1 Moulding Mounting - NCRS Discussion Boards

C1 Moulding Mounting

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • David Lyon
    #1

    C1 Moulding Mounting

    I am having trouble getting the side fender stainless to clip to the clips I received in a kit I just ordered. My car is a '58. It appears the six clips that hold the side fender mouldings at the ends closest to the doors are too small. They don't clip to the moulding and hold. Any suggestions on this procedure would be very helpful.

    Thanks in advance!

    David
    Tags: None
      • Top
    • Roy B.
      Expired
      • February 1, 1975
      • 7044
      #2
      Re: C1 Moulding Mounting

      Aren't repro's just great . Try opening the crimped's area a little more which will in large them.
        • Top

        Comment

        • Roy B.
          Expired
          • February 1, 1975
          • 7044
          #3
          Re: C1 Moulding Mounting

          Aren't repro's just great . Try opening the crimped's area a little more which will in large them.
            • Top

            Comment

            • David Lyon
              #4
              Re: C1 Moulding Mounting

              Roy,

              I tried that. Only made it worse. Anyone got any original clips or knows of a source? This is extending my targeted completion date. After almost three years, I'd like to drive the '58 before the snow and cold arrives - I live in Maine. Maybe next summer?

              Thanks Roy!
                • Top

                Comment

                • David Lyon
                  #5
                  Re: C1 Moulding Mounting

                  Roy,

                  I tried that. Only made it worse. Anyone got any original clips or knows of a source? This is extending my targeted completion date. After almost three years, I'd like to drive the '58 before the snow and cold arrives - I live in Maine. Maybe next summer?

                  Thanks Roy!
                    • Top

                    Comment

                    • Robert D.
                      Very Frequent User
                      • April 1, 2003
                      • 305
                      #6
                      Re: C1 Moulding Mounting

                      got mine from paragon fit perfect all along
                        • Top

                        Comment

                        • Robert D.
                          Very Frequent User
                          • April 1, 2003
                          • 305
                          #7
                          Re: C1 Moulding Mounting

                          got mine from paragon fit perfect all along
                            • Top

                            Comment

                            • Ray C.
                              Extremely Frequent Poster
                              • June 30, 2001
                              • 1132
                              #8
                              Re: C1 Moulding Mounting

                              I also purchased mine from Paragon and they worked fine. I did notice that if I put the curled end of the clip towards the car at the top and installed the molding from the bottom to the top it locked in fine.

                              Ray
                              Ray Carney
                              1961 Sateen Silver 270-HP
                              1961 Fawn Beige 315-HP
                                • Top

                                Comment

                                • Ray C.
                                  Extremely Frequent Poster
                                  • June 30, 2001
                                  • 1132
                                  #9
                                  Re: C1 Moulding Mounting

                                  I also purchased mine from Paragon and they worked fine. I did notice that if I put the curled end of the clip towards the car at the top and installed the molding from the bottom to the top it locked in fine.

                                  Ray
                                  Ray Carney
                                  1961 Sateen Silver 270-HP
                                  1961 Fawn Beige 315-HP
                                    • Top

                                    Comment

                                    • David Lyon
                                      #10
                                      Re: C1 Moulding Mounting

                                      Thanks for the responses. I check with Paragon.

                                      David
                                        • Top

                                        Comment

                                        • David Lyon
                                          #11
                                          Re: C1 Moulding Mounting

                                          Thanks for the responses. I check with Paragon.

                                          David
                                            • Top

                                            Comment

                                            Previous template Next
                                            Working...

                                            Debug Information

                                            Searching...Please wait.
                                            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                            Please push the back button and reload the previous window.'
                                            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                            Please push the back button and reload the previous window.'
                                            An internal error has occurred and the module cannot be displayed.
                                            There are no results that meet this criteria.
                                            Search Result for "|||"