intake manifold gaskets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike #32651

    #1

    intake manifold gaskets

    I'm looking for a GM part# for intake manifold gaskets for my 1969 L46 (350/350) with intake manifold #3927184. Would I be better off buying a set from Fel-Pro?
    Thanks, Mike
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 42936

    #2
    Re: intake manifold gaskets

    Mike-----

    The current GM SERVICE gasket set for your application is GM #10147994. This gasket set will not be "correct" with respect to all of the nuances of configuration, but it will SERVICE your application perfectly. Personally, with respect to intake manifold gaskets, I have a preference for the stock type embossed gaskets which are what the 10147994 are. So, I would recommend this type to you over other types. Use this gasket with just a slight film of sealer around the water jacket passages and no sealer around the intake ports or exhaust crossover.

    Also, I recommend that you omit using the rubber end seals which are supplied with the gasket kit and, instead, use Permatex Ultra-Copper RTV.
    In Appreciation of John Hinckley

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 42936

      #3
      Re: intake manifold gaskets

      Mike-----

      The current GM SERVICE gasket set for your application is GM #10147994. This gasket set will not be "correct" with respect to all of the nuances of configuration, but it will SERVICE your application perfectly. Personally, with respect to intake manifold gaskets, I have a preference for the stock type embossed gaskets which are what the 10147994 are. So, I would recommend this type to you over other types. Use this gasket with just a slight film of sealer around the water jacket passages and no sealer around the intake ports or exhaust crossover.

      Also, I recommend that you omit using the rubber end seals which are supplied with the gasket kit and, instead, use Permatex Ultra-Copper RTV.
      In Appreciation of John Hinckley

      Comment

      • Mike #32651

        #4
        Re: intake manifold gaskets

        Thanks Joe

        Comment

        • Mike #32651

          #5
          Re: intake manifold gaskets

          Thanks Joe

          Comment

          • Robert C.
            Expired
            • December 1, 1993
            • 1153

            #6
            Re: intake manifold gaskets

            Mike, I think that Paragon sells the "correct configured" intake gaskets.

            Comment

            • Robert C.
              Expired
              • December 1, 1993
              • 1153

              #7
              Re: intake manifold gaskets

              Mike, I think that Paragon sells the "correct configured" intake gaskets.

              Comment

              Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"