Hard start problem - NCRS Discussion Boards

Hard start problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom S.
    Extremely Frequent Poster
    • March 1, 2004
    • 1087

    Hard start problem

    I have a 69 L-46 350/350 that I have just put a brand new 7029207 carb on.It had an incorrct holly on it when I bought it, but started very easy.I since have put on the correct intake, installed the brand new still in the wrapper carb after trying 2 rebuilts that were not good and the car is miserable to start.I have to pump it 10-12 times after setting the choke and it still turns over 10-12 times before it starts, it runs perfect after I get it started and warmed up a little. Any help would be appreciated.

    Tom Stanton #41491
  • Roy B.
    Expired
    • February 1, 1975
    • 7044

    #2
    Re: Hard start problem

    Check for a vacuum leak ( intake or carb gasket)

    Comment

    • Jim T.
      Expired
      • March 1, 1993
      • 5351

      #3
      Re: Hard start problem

      How does it start after driving it throughout the day? I removed my original Q-Jet off my 70 because of the hard starting in 1974 and I am still using a Holley. The Q-Jets can leak fuel and become hard stating, having to pump fuel to fill up the carb after sitting when starting the car.

      Comment

      • Tom S.
        Extremely Frequent Poster
        • March 1, 2004
        • 1087

        #4
        Re: Hard start problem

        Roy and Jim
        It was a vacuum leak alright.You have heard the one about 2 many cooks in the kitchen! I had a friend helping me! Well when I checked the Carb bolts they were all finger tight!He said I thought you tightend them ,I said I thought you tightend them! Well they are tight now and it starts in a turn and a half or 2 turns! Thanks for all the support! I am not a mechanic but do what I can, and all you guys are a lot of help! Thanks again.

        Tom

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"