Previous C2 Hood Post (rebonding) - NCRS Discussion Boards

Previous C2 Hood Post (rebonding)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Peter M.
    Very Frequent User
    • February 1, 1984
    • 361

    Previous C2 Hood Post (rebonding)

    I know I read a recent post regararding original hood frame to hood skin flexible bond material - tot the outer edge resin sandwich but the cross bracing goop that never fully hardens. Can someone please advise what posting this was as I want to consider options for the correct rebond using factory correct material.
    Thanks
  • Chuck S.
    Expired
    • April 1, 1992
    • 4668

    #2
    Re: Previous C2 Hood Post (rebonding)

    Peter, there is limited information regarding rebonding your hood in that post, but there are many other posts in the archives on bonding hoods and general fiberglass.



    Archive searches are really effective if you understand how the search engine works. Just type any word that is highly likely to be in a post or topic of interest. Use enough words/terms to narrow the field. If you use too many, then you are likely to get nothing. Then, click "ALL TERMS", and then click "Search".

    If ALL terms mentioned are in a post, then it is found. For example "hood bond" turns up a large number of posts, including the one you wanted, that may/may not be relevant; "hood brace bonding non-hardening material" results in zero hits.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"