C2 Ground strap connection - NCRS Discussion Boards

C2 Ground strap connection

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Justin N.
    Expired
    • February 1, 2004
    • 318

    C2 Ground strap connection

    Dear Members,
    Today, while unbolting body mounts, I came across a groundstrap that seemed to be welded to the body? I haven't cross checked my new strap kit from Lectric Limited with the originals. The body mount, below the window washer reservoir, had a strap near by bolted to the frame and welded at the other end. I think the welded strap end was near the end bracket for my rocker molding. I can take a picture tomorrow. Thanks for any suggestions!

    Justin #41362
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: C2 Ground strap connection

    the strap you refer to wasn't originally welded to the rocker panel reinforcement channel but was attached by a press fit. the lectric limited strap will have the correct strap end. mike

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"