Re: C4 Electronic Gizmos and No Start
Thanks Patrick. I cleaned the pellet with contact cleaner and also very carefully cleaned the contacts inside the switch but there was no change. I can't see the contacts inside the switch but I have to assume that they're clean because I drive this car every day (used too anyway) so there should be no corrosion from non use. Further testing is definitely pointing toward the ignition switch itself so this AM's project will be to temporarily install a new auto parts bypass system. It sounds like a very simple installation. If that corrects the problem, I will eventually replace the lock and key unit with correct GM parts.
Michael
Thanks Patrick. I cleaned the pellet with contact cleaner and also very carefully cleaned the contacts inside the switch but there was no change. I can't see the contacts inside the switch but I have to assume that they're clean because I drive this car every day (used too anyway) so there should be no corrosion from non use. Further testing is definitely pointing toward the ignition switch itself so this AM's project will be to temporarily install a new auto parts bypass system. It sounds like a very simple installation. If that corrects the problem, I will eventually replace the lock and key unit with correct GM parts.
Michael
Comment