Q-jet rebuild - NCRS Discussion Boards

Q-jet rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom H.
    Expired
    • May 31, 2003
    • 89

    Q-jet rebuild

    I am in the process of putting my 72 coupe back to original condition. I have the original carb, but it is in need of a complete rebuild. Can anyone recommend a service that has a good reputation in rebuilding Q-jets?
  • Patrick H.
    Beyond Control Poster
    • December 1, 1989
    • 11608

    #2
    Re: Q-jet rebuild

    Try Jerry Luck (see Archives for contact info) if you have plenty of time to spare. He does great work but is always a few months behind.

    Else I've had good luck with Phil at http://www.customrebuiltcarbs.com and he usually is at Carlisle.

    On the West coast (if you're closer) there is a place that (was) called Brad Urban's Carb Shop: The Carb Shop; 1457 Philadelphia, Unit 24; Ontario, CA 91761; 909/947-7744. I haven't heard of them for a few years but that' doesn't mean the place doesn't still operate.

    Good luck,

    Patrick
    72 Top Flight/Bowtie 350/200 4 speed coupe
    Vice-Chairman (West), Michigan Chapter NCRS
    71 "deer modified" coupe
    72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
    2008 coupe
    Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

    Comment

    • Bill W.
      Extremely Frequent Poster
      • March 1, 1980
      • 2000

      #3
      Re: Q-jet rebuild

      Bob Kunz did mine...Bill

      Comment

      • Steve L.
        Very Frequent User
        • June 30, 2001
        • 763

        #4
        Re: Q-jet rebuild

        Jerry did my 73. Took over 6 months. But it now looks like it is brand new.

        Steve L
        73 coupe since new
        Steve L
        73 coupe since new
        Capital Corvette Club
        Ottawa, Canada

        Comment

        • Tom H.
          Expired
          • May 31, 2003
          • 89

          #5
          Re: Q-jet rebuild

          Thanks to each of you for the suggestions, I am looking up addresses and will send it to one of those that you have recommended. Tom

          Comment

          • Clem Z.
            Expired
            • January 1, 2006
            • 9427

            #6
            Re: Q-jet rebuild

            try craig woodruff in youngstown ohio 330-799-9479 as he may be a little quicker than some of the other rebuilders

            Comment

            Working...

            Debug Information

            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"