61 c-1 front motor mount - NCRS Discussion Boards

61 c-1 front motor mount

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • William Gallentine

    61 c-1 front motor mount

    On the front of the engine, motor mount on 61 should it have a hole for the generator bracket to go thru or does the adjusting bracket go in front with no hole on top right,thru the front eng support? Thanks again Bill
  • Dennis C.
    NCRS Past Judging Chairman
    • January 1, 1984
    • 2409

    #2
    Bill, In front, no hole. *NM*

    Comment

    • Mike E.
      Extremely Frequent Poster
      • February 28, 1975
      • 5134

      #3
      Re: 61 c-1 front motor mount

      Correct moun t "bolt" has a hexagonal section that steps the mounting arm out away from the water pump so that it clears the motor mount. Most Corvette supply houses have those (Central, Paragon, etc.)

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"