67 Corvette washer nozzles

[Nick Vigorito]

Ordered a new set of windshield washer nozzles for my 67. I noticed that the old ones have a (brass?) squirter "ball" that can be rotated by sticking a pin in it to adjust where they spray. The new ones I got from LI Corvette have a round brass squirter "face". It doesn't look like it can be adjusted or if so not adjusted easily.

What is the correct configuration for the windshield washer nozzles for a 67? Thanks!

Nick

[Mike M.]

Re: 67 Corvette washer nozzles

if you are going to PV the vette, you'll have to use the originals as the repo's are near impossible to adjust and the judges will deduct on originality during flight judging as well.mike

[John H.]

Re: 67 Corvette washer nozzles

Brian Tilles (Corvette Specialties of Maryland) had the first couple of sets of prototype reproduction midyear nozzles on display at Windsor and at Carlisle - they're spot-on; he can probably tell you when he'll have them available in volume.

[Nick Vigorito]

Re: 67 Corvette washer nozzles

John,

Thanks for the heads up. Called but Brian is not back yet from Carlisle.

Nick

[Brian M.]

Re: 67 Corvette washer nozzles

I didn't know that CS was re-poping these, and didn't have the pleasure to meet Brian at Windsor. And I spent an hour cleaning my balls.

[Earl G.]

Re: 67 Corvette washer nozzles

Brain, WOW!!!

[Chuck G.]

Re: 67 Corvette washer nozzles

I saw Brian's prototypes in Windsor too. DEAD on the money. I don't know when they'll be "mass produced" either. Give Brian a call. Chuck