C1 - Front End Rubber Seals - NCRS Discussion Boards

C1 - Front End Rubber Seals

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brad K.
    Expired
    • August 31, 1990
    • 414

    C1 - Front End Rubber Seals

    What was the shape of the rubber seals on the steering knuckle pivots and the swing arm pivots on the C1 front ends? Where they in fact o-rings about 1" diameter or were they circular rubber bands about 3/8-1/4" wide (rectangular in cross section)? Most OEM shafts I've run across contain the o-rings. But I think that my '59 front end end came equipped with bands (not sure if they were original)
    Brad
  • Dennis A.
    Expired
    • April 30, 1999
    • 1010

    #2
    Re: C1 - Front End Rubber Seals

    Brad...

    My 61' had the rectangular seals. I replaced them (some were missing) with new rect. seals from CC. What mistake... some have already tore, If you do not plan to be judged, go with "O" Rings or a molded seal that is not a cut rubber band.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"