'67 REAR BRAKE CALIPER BLEEDING - NCRS Discussion Boards

'67 REAR BRAKE CALIPER BLEEDING

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rob A.
    Expired
    • December 1, 1991
    • 2126

    '67 REAR BRAKE CALIPER BLEEDING

    I decided to re-bleed the rear calipers to make sure no air remained in the system. The pedal was just a little softer than I though it should be. I tried gravity bleeding the calipers but no fluid wanted to come out.(The front calipers gravity bleed fine) I then tried a hand vacuum bleeding kit with slightly better success. At this point, no fluid comes out when the brake pedal is depressed. The master cylinder is full and no changes have been to the lines or any of them dissconnected.
  • Mike McKown

    #2
    Re: '67 REAR BRAKE CALIPER BLEEDING

    Sounds like the piston shifted in your distribution block and sht the fluid of to the rear brakes.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"