Early C3 wiper arms - NCRS Discussion Boards

Early C3 wiper arms

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael W.
    Expired
    • April 1, 1997
    • 4290

    Early C3 wiper arms

    Are 68-73 wiper arms similar in configuration? I'm looking for a correct replacement set for my '73

    Mike
  • Harmon C.
    Extremely Frequent Poster
    • August 31, 1994
    • 3228

    #2
    Re: Early C3 wiper arms

    Mike They are all the same. Lyle
    Lyle

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193

      #3
      Re: Early C3 wiper arms

      Lyle and Mike-----

      1968 is not the same as later. 1968 was a one-year-only design as far as the wiper arms are concerned. As far as I know, they cannot be used on later models. Also, as far as I know, the 69-74 were the same, although I suppose it's possible that late 74 used the 75+ design. The 75-82 pieces became the SERVICE pieces for 69-74 and will retrofit to 69-74. They will not retrofit to 68, though.
      In Appreciation of John Hinckley

      Comment

      • Harmon C.
        Extremely Frequent Poster
        • August 31, 1994
        • 3228

        #4
        Re: Early C3 wiper arms

        Joe did the 68 have the metal washer tubes as I have about 50 examples and see no difference but all I ever bought was the metal tube type. The change over in 74 happened very eary and most 74's will have the rubber hoses for the washers.The TI&JG puts the change about vin 5000 or 5th-12th of Oct. 73. Lyle
        Lyle

        Comment

        • Jack H.
          Extremely Frequent Poster
          • April 1, 1990
          • 9906

          #5
          No....

          '68 was unique in that it had no squirter tubes running alongside the wiper arms.

          Comment

          • Joe L.
            Beyond Control Poster
            • February 1, 1988
            • 43193

            #6
            Re: No....

            Jack and Lyle-----

            Yes, 1968 did not have the tubes. However, I think that there was some other functional difference between the 68 and later arms also. I've forgotten what it is, though.
            In Appreciation of John Hinckley

            Comment

            • Geoff C.
              Expired
              • May 31, 1979
              • 1613

              #7
              68 is all by itself - no brass piping *NM*

              Comment

              • Stephen W.
                Very Frequent User
                • March 1, 2002
                • 301

                #8
                Re: No....

                Now you guys have me curious. I'm gunna have to dig out the box I have the original 68 wiper arms in to see what they look like. Now my 68 is a late production ( July 68) if that makes any difference.

                Comment

                • bruce11495

                  #9
                  Re: Early C3 wiper arms

                  Joe....Do you have a part number for the right side wiper arm for 69-74? I know my 74 had the "new" style, otherwise I would have exchanged them when I sold it.

                  Comment

                  • Joe L.
                    Beyond Control Poster
                    • February 1, 1988
                    • 43193

                    #10
                    Re: Early C3 wiper arms

                    bruce-----

                    The original PRODUCTION and SERVICE wiper arms for 69 were:

                    left side----GM #3956245
                    right side---GM #3956246

                    In late 1969 the right side arm was discontinued and replaced by GM #3965154. The 3956245 and 3965154 then continued to be used right through E1974.
                    In Appreciation of John Hinckley

                    Comment

                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"