1969 Transistor Ignition Question - NCRS Discussion Boards

1969 Transistor Ignition Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dean Gittleson

    1969 Transistor Ignition Question

    I have a 69 435hp Corvette where I took my amplifier box apart and misplaced my diagram for connecting the wires back up to the pulse amplifier. The circuit board has three terminals labeled 1, 2 and 3. Can someone help with the following. What color wire (black, pink, gray)goes to what terminal?

    Thanks, Dean
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    #2
    Re: 1969 Transistor Ignition Question

    black goes next to the gold colored diode,gray goes next to the 2 creamic caps and the pink goes next to the screw head.the wires are just the correct length so it is almost imposable to get them to the wrong terminal

    Comment

    • Dean Gittleson

      #3
      Re: 1969 Transistor Ignition Question

      Thank you. I installed the amplifier this morning and it fired right up.

      Comment

      • Clem Z.
        Expired
        • January 1, 2006
        • 9427

        #4
        Re: 1969 Transistor Ignition Question

        making sure that were you attach the ground wire to the amp case is clean of paint is important

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"