63 hose clamps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bill W.
    Extremely Frequent Poster
    • March 1, 1980
    • 2000

    #1

    63 hose clamps

    On a 63 what is the correct color or finish on the corbin type (spring ring ) heater hose clamps . thanks Bill
  • Michael H.
    Expired
    • January 29, 2008
    • 7477

    #2
    Re: 63 hose clamps

    Bill,

    In 63 and 64, the smaller 5/8" clamp was a light shade of gold and the 3/4" was a dark flat red. This changed in 65, or somewhere near the introduction of the 65 model year, to gold and flat orange.

    In addition, the 63-64 clamps are unique as the overall length of the wire is about 3/16" longer than all 65 and newer replacements. The ears stand up taller on the 63-64 and it's enough to be obvious. I have a few NOS and can post a scan if needed.

    Michael

    Comment

    • Bill W.
      Extremely Frequent Poster
      • March 1, 1980
      • 2000

      #3
      Re: 63 hose clamps

      Thanks Michael, a picture would be great. Bill

      Comment

      • Michael H.
        Expired
        • January 29, 2008
        • 7477

        #4
        Scan of 63-64 3/4" clamp *NM*

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"