Wiper Blades for '64 - NCRS Discussion Boards

Wiper Blades for '64

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Randy Adams
    #1

    Wiper Blades for '64

    Who carries wiper blades for '64 that are flat and not the tent shaped ones. The Technical Info. Manual says "the blade holder has a bright finish with TRICO stamped on both ends...top surface is flat." The parts houses I've contacted all have tent shaped or don't have. I was surprised LIC didn't have any. I appreciate your help.
    Tags: None
      • Top
    • Mike M.
      NCRS Past President
      • May 31, 1974
      • 8365
      #2
      Re: Wiper Blades for '64

      junk yards may donate needed wiper blade HOLDER(which i think you're referring to). try searching for early 60's full size GM pass car wiper blade holders. good luck. junk yards playgrounds for boys with too many toys. mikie
        • Top

        Comment

        • Randy Adams
          #3
          Re: Wiper Blades for '64

          That's what I'm looking for Mike. Thanks for the reply.
            • Top

            Comment

            • Mike M.
              Expired
              • September 30, 1999
              • 710
              #4
              Re: Wiper Blades for '64

              Randy, If you don't have any luck at a junkyard try John Pirkle. http://www.johnpirkle.com/company%20...%20history.htm
                • Top

                Comment

                • Randy Adams
                  #5
                  Re: Wiper Blades for '64

                  Thanks for the info.
                    • Top

                    Comment

                    • William C.
                      NCRS Past President
                      • May 31, 1975
                      • 6037
                      #6
                      Re: Wiper Blades for '64

                      Note that pass car wiper blade holders are shaped differently from Corvette and will create excess drag when run.
                      Bill Clupper #618
                        • Top

                        Comment

                        Previous template Next
                        Working...

                        Debug Information

                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"