'67 SIDE EXHAUST MOULDING ATTACHMENT - NCRS Discussion Boards

'67 SIDE EXHAUST MOULDING ATTACHMENT

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rob A.
    Expired
    • December 1, 1991
    • 2126

    '67 SIDE EXHAUST MOULDING ATTACHMENT

    The screws that I removed from my side exhaust mouldings that go over the actual covers themselves were smaller than the replacements available. They had small cone shaped type washers that went under the screw heads. Were these the correct, original attaching hardware for the trim, and if so, are they available from any vendor currently?
  • John M.
    Expired
    • January 1, 1998
    • 813

    #2
    Re: '67 SIDE EXHAUST MOULDING ATTACHMENT

    Rob, I think LIC sends both type screws for this. One type for original and another for replacement. You might contact them.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"