67 turn signal wire assy

[Roy B.]

Who or where can I get a turn signal wire assy ? My flasher nob broke off and the left turn arm won't stay down. 1967

[Warren S.]

Re: 67 turn signal wire assy

Roy,
I got a turn signal switch from my Chevrolet dealer a couple of years ago. The one I got was for a telescopic steering column and I think that it was a different part number than a non telescopic one. If I remember correctly, the switch is applicable to 67 and 68 Corvettes only.

[Ed Jennings]

Re: 67 turn signal wire assy

There was a Delco replacement available from the Chevy store a few years back, which required an adapter cable to work and a lot of "fitting". There is now a reproduction available and is carried by all the usual catalog vendors. Costs around $60 if I recall correctly.

[Gerard F.]

Funny, my left turn signal arm won't

stay down either, but the arm stays up for a right turn. Is there a cheap fix, other then changing the switch? 1967 also.

Jerry Fuccillo
#42179

[Justin N.]

Shee-Mar Rules!

Roy,
I found my 67 non-tele signal at Shee-Mar for $52 I think. (303)678-5334 It has the original Delco Remy connector also.

Justin #43162

[Paul L.]

Re: Funny, my left turn signal arm won't

Gerard,
Same problem. The little leg on the cancelling cam broke off (see pic). I could not devise a cheap fix so ordered a unit from Shee-Mar.

[Paul L.]

BTW on Ordering from Shee-Mar

Do not order from the web site. The listing (SM211) for 1967-68 is not correct. That will fetch you a 1969- unit. Telephone and ask for Scott Farrell. I have brought that incorrect listing to his attention and he knows the right part number.

[Roy B.]

Re: 67 turn signal wire assy

This one is on E-bay and his feed back selling parts is great . He said you only remove the little dash light for it and it works great. Cost $95.00 e-bay #2489876628