'Stingray' Emblem - NCRS Discussion Boards

'Stingray' Emblem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Don O'Connell #33101

    #16
    One roll, make a die, and can you say eBay.... *NM*

    Comment

    • Chuck S.
      Expired
      • April 1, 1992
      • 4668

      #17
      Ah, Yes...No Wonder I Couldn't Place It...

      Terry,

      We don't have ice dam problems down here; no snow, no ice, no problems.

      I also have seen that stuff installed on TV. I believe it is like rolled polymer sheet with peel-off paper protecting extreme stickyiness on both sides. I would probably have to drive all the way to Oklahoma to find it though. Next time one of you Midwesterners do your roof, why don't you just mail me down a piece in an 9 X 12 manila envelope; that should be enough to do three cars.

      Die-cut rubber with adhesive on both sides...hmmmm...sounds like the perfect product for Dr. Rebuild's catalog.

      Thanks for your help, Terry.

      Chuck Sangerhausen

      Comment

      • Mike Yager

        #18
        Probably because they were not there in 68.

        Perhaps the emblems were attached with adhesive because the Stingray emblems were not on the 68. The original tooling would not have holes drilled because the emblems were not on the car in 68. It probably was easier to just stick the emblems on with adhesive than rework the tooling to add holes to the panels for the speednuts.

        Comment

        • Reba 8804

          #19
          Re: 'Stingray' Emblem

          Could it have something to do with the location? Seems to me that it would be pretty difficult to get to the inner side of the fender and attach a speed nut.

          Comment

          • Tom M.
            Very Frequent User
            • August 31, 2000
            • 231

            #20
            Re: 'Stingray' Emblem Terry I believe you are Righ

            I found a NOS emblem at a dealers going out of business sale, the paint job on it is different than the repos, quality is bad, I will try to find the part# on the box if I can find it.

            Tom

            Comment

            Working...

            Debug Information

            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"