65 Jack Hanlde Descreption? - NCRS Discussion Boards

65 Jack Hanlde Descreption?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sheldon S.
    Very Frequent User
    • March 1, 1999
    • 474

    65 Jack Hanlde Descreption?

    There are three types of jack handles for a 65, one with no hole in handle, one with a single hole and the other with two holes. My question is- I have a handle that has one hole going through both sides of the handle and then one hole through the top surface fairly close to the other hole. Is this a correct handle for a mid production 65? Thanks in advance Sheldon
  • Rob A.
    Expired
    • December 1, 1991
    • 2126

    #2
    Re: 65 Jack Hanlde Descreption?

    My understanding is no holes through early '65, then 1 hole until '67. The handle you describe with 3 holes is definately correct for '67.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"