C2 Radio Side Panel Screws - NCRS Discussion Boards

C2 Radio Side Panel Screws

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • R N.
    Expired
    • May 31, 2002
    • 640

    C2 Radio Side Panel Screws

    Hi All:

    I've seen two different types of screws to attach the radio side panels in place. The ones I think are correct are a phillips head chrome screw with a built-in washer, a one-piece unit.

    The other one I've seen is a also a phillips chrome screw, but with a separate cone-type washer that is attached just under the head of the screw.

    Which screw is correct?
    Which of the vendors have the correct screws?

    As always, thank you for your help.

    Kurt
  • Joe R.
    Extremely Frequent Poster
    • July 31, 1976
    • 4547

    #2
    Re: C2 Radio Side Panel Screws

    Kurt,

    The Philips head screw with the washer made on. Sorta flares out to make a very large screw. Long Island sells the correct screw along with many other vendors. The other screw you have seen with the washer is just a common upholstry screw.

    Regards,

    JR

    Comment

    • R N.
      Expired
      • May 31, 2002
      • 640

      #3
      Thanks, JR *NM*

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"