65 Door Panel Question

[George C.]

I have a 65 Roadster, I restored the interior 2 years ago, but never put the screws in the arm rests. The reason for this, is that there were no screws in them when I bought the car, and when I ordered replacements the vendor sent me large sheet metal screws. I left them off and kind of forgot about it till I was tinkering with the car today. The doors in my car have a 1/4 X 20 tapped hole that seems to be about where the arm rest screws should go. My AIM is not available right now, so I can not get the part number for the screw. Any help in figuring this out is appreciated as always.

Thank you,

George,
#36908

[Jeremy Hedges]

Re: 65 Door Panel Question

The arm rests in your '65 do use a 1/4 20 screw with a phillips head and a washer. They are about 4 inches long.

Jeremy Hedges
#31711

[George C.]

Re: 65 Door Panel Question

Jeremy,
Thank you, I'll contact the vendor tomorrow and see what he says. Do you know if they are all the same for 63 - 67?

George