C2: Holley Carbs- Does anyone know - NCRS Discussion Boards

C2: Holley Carbs- Does anyone know

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gerard F.
    Extremely Frequent Poster
    • June 30, 2004
    • 3803

    C2: Holley Carbs- Does anyone know

    The assembly process for Holley carbs. When was the date code put on the air horn; was the carb fully assembled at that point? What was the process of sending the carb to the Corvette assembly plant, and at what point in the assembly process was the carb put on the engine, and then tested out.

    Jerry Fuccillo
    #42179
    Jerry Fuccillo
    1967 327/300 Convertible since 1968
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: C2: Holley Carbs- Does anyone know

    Jerry -

    The carb was installed about 1/3 of the way down the engine dress line, and its only "test" was the first time the car was started and driven off at the end of the Final Line. The only adjustment made to the carb at St. Louis was idle rpm, if it wasn't in spec when it was started (unless the carb was really out of whack).

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"