C-1 /61 In my last Chapter Judging Meet, I was docted points for incorrect bolts that hold the front splash pans onto the car. The JM calls out hex bolt with a small "E" in the center. The bolts I used were hex with a small "E" in the center but, have a (dished head).
Does any one know a Corvette parts house that has a (hex bolt 1/4-20 with the small "E" that I may correct this issue.
PS The JM does not indicate dished head or not.
Thanks Richard
Does any one know a Corvette parts house that has a (hex bolt 1/4-20 with the small "E" that I may correct this issue.
PS The JM does not indicate dished head or not.
Thanks Richard
Comment