c1 door post window run

[Bill B.]

while trying to attach the front window runs back on my 1960 doorposts, i found 3 differing methods? the judging manual says a phillips head screw at the bottom position and flat head rivets at the upper and center positions, the aim shows rivets at the 1,3,5 positions and screws at the 2,4 positions, the st-12 shows screws at the 1,3,4 positions and rivets at the 2,5 spots.are the screws 6-32 flat head phillips ?

[Roy B.]

Re: c1 door post window run

phillips 'V' not flat, there were three different design door post for 56 to 62.
Many owners don't know that! Or the JM

[Roy B.]

Re: c1 door post window run

phillips 'V' not flat, there were three different design door post for 56 to 62.
Many owners don't know that! Or the JM