C1 - '59 Trunk Mat Fit - NCRS Discussion Boards

C1 - '59 Trunk Mat Fit

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brad K.
    Expired
    • August 31, 1990
    • 414

    C1 - '59 Trunk Mat Fit

    Ok...My original red trunk mat is long gone. I bought a new one from Al Knoch and it doesn't fit properly between the original jack handle bracket holes on the right and the lug wrench bracket on the left. The mat doesn't lay right and there are major wrinkles. Did it lay like this originally? Or is this another example of poor quality repo's? Would it be appropriate to slightly trim the mat so it lays properly? The mat is not off by much....maybe a 1/4" trim on both sides would be plenty.
    Thanks,
    Brad
  • kenneth bingener NCRS#38563

    #2
    Re: C1 - '59 Trunk Mat Fit

    Had to do the same for my 58. Bought a mat from Mary Jo. Once trimmed a little it fit nicely. Pix in Noland's book show the mats fairly flat. Ken

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"