C2 wiper motor mounting screw

[Floyd #21606]

What type and size is the upper most bolt/screw that secures the wiper motor to the firewall. This is the one that is up by the base of the windshield. I have the 3 same size hex screws but I have misplaced the odd ball screw and can't remember what it is. Any help will be much appreciated.

Thanks,
Floyd
65 Fuelie

[Philip Whitaker Member# 2024]

Re: C2 wiper motor mounting screw

I believe the upper right machine screw is the same thread size and head as the other three screws but is about a half inch longer.

[Gary S.]

Re: C2 wiper motor mounting screw

I haven't messed around with a C2 in quite a number of years, but isn't the wiper motor secured to the fiewall with through-bolts? IIRC, I had to remove lots of the dash just to access the mounting and it was a PITA.
Gary

[Floyd #21606]

Re: C2 wiper motor mounting screw - Philip & Gary

Philip and Gary, Thanks for the information about the screw
Regards,
Floyd
65 Fuelie