C2--HORNS - NCRS Discussion Boards

C2--HORNS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Howard K.
    Expired
    • November 11, 2011
    • 111

    C2--HORNS

    I am trying to adjust the points on my 67 horns but having difficulty finding the proper size wrench or socket. Does anyone have the answer ? ---THANKS
  • mike mccagh

    #2
    Re: C2--HORNS

    never could come up with a wrench or socket to fit the clamshell horn adjusting device. had to resort to bubba's favorite tool==== Mr. Vice-grip. saturate the adjustor with wd 40 or some such product then lightly tighten the vice grips and rotate clockwise then clochwise till the adjustor threads in and out without too much effort. good luck, mike

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"