C2 bare metal finish option - NCRS Discussion Boards

C2 bare metal finish option

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Randy R.
    Very Frequent User
    • March 1, 1983
    • 477

    C2 bare metal finish option

    I am considering treating some of the bare cast/steel suspension and drive train items with a gray(zinc) phosphate solution. I intend to drive the car but would like to have it judged ocasionally. Parts that I have bead blasted, placed in zip lock bags and put in cold storage have rusted so I know I will have to do something to prevent rust. I also think the bead blasted parts are too "white". I am skeptical about clear coating and spraying with products like Prelube 6. So I have come to the point of considering a gray phosphate treatment for items such as the steering knuckles and differential case. I have tried this on some items such as the manual transmission linkage rods.
    Does anyone have any thoughts regarding this option?
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"