C2 Glove Box

[Dave K.]

I'm trying to put a new glove box insert over my glove box frame and it is tight. I'm having difficulty getting it to fit over the frame and to align up. Any tricks to this?

REgards,
Dave Kitch
33108

[Dave K.]

Re: C2 Glove Box

I actually mean the glove box cardboard with flock liner. I have a repro that is a very tight fit over the frame and can't get both edges of the liner over the frame.

Dave Kitch

[Jim S.]

Re: C2 Glove Box

Dave,
What i did was spritz it with a spray bottle of water and zap it with hair drier.The combination of the dampness and the heat expanded it enough to stretsh over the frame,where I continued to dry it until it shrunk arround it.
Not too damp!!!
I wasnt going to post this response as I felt it probably wasnt the best way to go at it....but since no one else gave you an alternative ,here you go!
Hope this helps...
Jim

[Dave K.]

Re: C2 Glove Box

Jim,

Thnaks but I got it over the frame. It took two of us to work both sides. A little ridiculous to require two people but that's repop parts.

Dave Kitch

[Jim S.]

Your are preaching to the choir here!

At least you got it done, and yours wasn't soggy !!