C2 Expansion tank - NCRS Discussion Boards

C2 Expansion tank

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael S.
    Frequent User
    • May 31, 2002
    • 91

    C2 Expansion tank

    How do I remove the cap on my expansion tank ? I turn it counterclockwise until it appears to hit 2 stops/tabs on the neck. I can't seem to jimmy it off there nor have I been successful in depressing the cap further to clear the tabs and further rotate counterclockwise- unless I need to try harder.

    Looks like spring in Connecticut today- I think I am going for a ride !

    Thanks
  • Stephen L.
    Extremely Frequent Poster
    • May 31, 1984
    • 3148

    #2
    Re: C2 Expansion tank

    Counterclockwise as shown on the cap is the correct direcction to remove the cap. It should turn to the tabs, and then be depressed to complete the removal. Your cap is probably stuck in such a manner as it cannot be fully depressed to clear the tabs. A little more grunt force to depress it is required. If you have an aftermarket cap there is the possibility that the tabs are slighly different and you may need a little more rotational force...
    Good luck.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"