C2 67 Coupe Wing Vent Glass

[Stephen L.]

Someone posted a photo of a fixture for installing the glass in the wingvent frame. It was a neat idea and I'm ready to install my glass. I cannot locate the photo. If anyone has it, could they repost it.

Thanks

[Jason B.]

Re: C2 67 Coupe Wing Vent Glass

Steve,

I saved that post and have it tucked away. If you can wait until tomorrow morning I can get you a link to it.

Jason B.

[Stephen L.]

Re: C2 67 Coupe Wing Vent Glass

Thanks Jason. I decided to make one from memory and after cutting it out and trying it, I found that the window goes together really easy and there is not a need for the jig. Used lots of soapy water and it slid right in......That wingvent could be replaced on the car in about 2 minutes.

[Gordon Peterson #4961]

Re: C2 67 Coupe Wing Vent Glass

Hi Steve -

That was my post, and I've since done the other vent window in my car using the same jig with the same ease. I've used the Workman without the jig to do the side windows as well. Thanks to Terry McManmon, our Restorer editor, an expanded version of the original post with the picture will be included in the upcoming Restorer mag.

Pete

[Stephen L.]

Re: C2 67 Coupe Wing Vent Glass

Thanks for the reply...