1965 SHP oil dip stick tube location

[Floyd #21606]

Does anyone have a picture of their the dip stick/tube on a 65 or 66 shp 327 with with power brakes. My dip stick which is straight up is very very close to the master cylinder and very difficult to remove because of the master cylinder.
I don't remember it being that close before I started the body off restoration
on my 65.

Regards,
Floyd
65 Fuelie

[John H.]

Re: 1965 SHP oil dip stick tube location

Floyd -

There was a post describing exactly the same issue on the CF C1/C2 forum a couple of months ago, during a manual-to-power brake conversion on a '65 using all correct brake parts; turned out he had either inadvertently bent the tube outboard at some point prior to the conversion or had an aftermarket tube of some sort; there was only one SB dipstick tube - no unique part just for power brakes.

[Floyd #21606]

Re: 1965 SHP oil dip stick tube location

John, You came through for me again. I really appreciate the information you provide.
Thanks again.
Floyd
65 Fuelie