C-2 Differential detailing - NCRS Discussion Boards

C-2 Differential detailing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kurt K.
    Very Frequent User
    • June 30, 2004
    • 194

    C-2 Differential detailing

    I just had my 67 diff blasted and would like to detail it the correct colors. I am using Cast Blast (a driver) for the housing. What colors were the side yokes and drive shaft flange? Thanks, Kurt
  • Joe C.
    Expired
    • August 31, 1999
    • 4598

    #2
    Re: C-2 Differential detailing

    Kurt:

    Since these are cast parts, paint with cast blast. The deflector shields are unplated steel, so use a clearcoat on them.
    The true factory finish is uncoated on all these parts. Some have had good luck with periodic application of a silicone based protectant like "Pre Lube 6" to all uncoated chassis parts.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"