Zo6 - NCRS Discussion Boards

Zo6

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ronald D, Rains

    Zo6

    Does anyone now if they are going to do more than 500HP in 06.
    Thanks Ronnie
  • Gary Bishop

    #2
    Re: Zo6

    I hear they revised the HP for the Z06 to 500+ hp. The Standard C6 to 415.

    Comment

    • Clem Z.
      Expired
      • January 1, 2006
      • 9427

      #3
      Re: Zo6

      they will be 505 HP with no change in the coming years according to dave hill speaking at the C-5/C-6 bash at the NCM. i was at the seminar when he stated this. they are mean looking cars. if mrs clem increases my allowance next year i may get one.

      Comment

      • Duke W.
        Beyond Control Poster
        • January 1, 1993
        • 15610

        #4
        Re: Zo6

        The LS7 is the first engine to be rated under a new SAE standard that requires "third party certification".

        The new ratings are 505 HP @ 6300 with a peak torque rating of 470 lb-ft @ 4800.

        These are 5 HP more, but 5 lb-ft less torque than the rating information that was released back in January.

        Duke

        Comment

        • Ronald D, Rains

          #5
          Re: Zo6

          Thanks guys, I got to get one.
          RDR

          Comment

          • Gary Bishop

            #6
            Re: Zo6

            I also heard that there will about 1 Z06 per dealer available.

            Comment

            • Duke W.
              Beyond Control Poster
              • January 1, 1993
              • 15610

              #7
              Re: Z06

              The plan is for Z06 to be 15-20 percent of production, and maximum annual capacity is about 35,000 Corvettes, so that's up to 7000 per year once production is up to full speed, which will take some time.

              Interestingly, '06 Z06 production begins July 25, and they will be built with '05 coupes and convertibles. Production of '06 coupes and convertibles does not begin until September 12.

              Duke

              Comment

              • Tony H.
                Very Frequent User
                • May 31, 1993
                • 537

                #8
                Re: Zo6

                Any word on MSRP for a Z-06?
                Tony

                Comment

                • Duke W.
                  Beyond Control Poster
                  • January 1, 1993
                  • 15610

                  #9
                  Re: Zo6

                  GM will announce the MSRP sometime in June - probably the latter half. It will most likely be somewhere in the sixties, but "estimates" from "knowledgeable sources" are all over the place. My guess is mid to mid-high sixties.

                  The base car will be very well equipped (1LZ). There is an "upgrade" equipment package (2LZ) of do-dads, and a few stand alone fluff options (Nav, polished wheels), but all the hard core performance equipment in the base 1LZ equipment package.

                  I think GM is planning the build based on 80 percent 1LZ.

                  Duke

                  Comment

                  • Gary Bishop

                    #10
                    Re: Zo6

                    I just read from someone that was at the Museum for the Birthday Bash. $85,000 for the BASE Z06 and $1??,??? for the top end one.

                    Comment

                    • Duke W.
                      Beyond Control Poster
                      • January 1, 1993
                      • 15610

                      #11
                      You're reading bad information *NM*

                      Comment

                      • Clem Z.
                        Expired
                        • January 1, 2006
                        • 9427

                        #12
                        Re: ZO-6

                        with a loaded vert costing close to $65K i would think the Z0-6 would go for more. if they do sell in the $65K range they had better up the % to better than 50% to meet the demand

                        Comment

                        • Terry M.
                          Beyond Control Poster
                          • September 30, 1980
                          • 15573

                          #13
                          Re: Zo6

                          Maybe that is Canadian $$ Gary.
                          Terry

                          Comment

                          Working...

                          Debug Information

                          Searching...Please wait.
                          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                          Please push the back button and reload the previous window.'
                          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                          Please push the back button and reload the previous window.'
                          An internal error has occurred and the module cannot be displayed.
                          There are no results that meet this criteria.
                          Search Result for "|||"