C-1 1956 gauges rebuilt

[Bud Baker]

I have a gas and temp gauge that needs to be rebuilt. Just the mech. itself. Who is a good company to send them to. Thanks. Bud

[John H.]

Re: C-1 1956 gauges rebuilt

Corvette Specialties of Maryland (Brian Tilles)




Corvette Specialties of Maryland

[Bud Baker]

Re: C-1 1956 gauges rebuilt

Thanks John. Know how I can get in touch with him??

[Bud Baker]

Never mind John, I found his ad in Driveline *NM*

[Brad K.]

Re: Never mind John, I found his ad in Driveline

Or....you could try "Clocks by Roger" ( www.corvetteclocks.com ) in Jackson, Tennessee. He's done all my gauges and done them very well.

[Michael K.]

Re: C-1 1956 gauges rebuilt

I had my tach rebuilt by Corvette Specialties of Maryland over the winter. I was originally quoted around $225. When they were done, it was over $300. I received it back with spots on the inside of the new lens. I shipped it back to be done right. They shipped it back to me without even taking it back apart to clean the lens. They said the spots were on the outside, but yet the spots were still there. I had the opportunity to speak to Brian a couple of times. He feels they do the best work around, and his attitude shows it. They have a very arrogant attitude and don't seem to care if they get any more business from me. There are too many corvette places out there that want my business, and are willing to treat me right.

[Bud Baker]

Mike... C-1 1956 gauges rebuilt

I found the same thing. I called them, they were not that nice over the phone, nor would they give me any kind of an idea of the cost and said that they were at least 10 weeks out. I talked with Mike Freeman of D&M who advertises also in Driveline. He was by far, the best one I talked with and also gave me a quote and would work with me on the time schedule. Guess what, they went off on the UPS truck today to D&M. We'll see just how good he is and how he backs what he says, although, just taling to him, I have great faith in his Company and his work.. (hope he reads this *smile*)

[John O.]

Re: Mike... C-1 1956 gauges rebuilt

Hi Bud

I had mine done by DM...They did a fantastic job and were very nice. I would recommend them to anyone.

John